2nd Generation Co-extruded Capped WPC Decking
Introduction
Co-extrusion Composite Decking
Advantages
Compared with the other two models, Co-extrusion composite decking has more outstanding performance in all aspects and is better than the previous two models. Not only does it have a high level of protection in all aspects (mildew-proof, fire-proof, moisture-proof, moth-proof, and crack-proof), it also has lower maintenance costs. Its strong anti-ultraviolet performance can make the color difference between the front and back almost invisible to the naked eye after being exposed to strong ultraviolet rays for 2,000 hours. Co-extruded products can be produced in two colors and two designs (different textures can be selected on the two planes), allowing you to enjoy the freedom of multiple choices.

Six-Round Hole 360° Co-extruded
Profile: Double Side Natural Wood Grain
Size: 140x23mm, Length is customized

Six-Round Hole 180° Semi Co-extruded
Profile: Natural Wood Grain/Closely Spaced Narrow-Grooves
Size: 148x23mm, Length is customized

Seven-Round Hole Fully 360° Co-extruded
Profile: Natural Wood Grain/Closely Spaced Narrow-Grooves
Size: 150x23mm, Length is customized

Seven-Round Hole 360° Co-extruded
Profile:Double Side Natural Wood Grain
Size: 145x23mm, Length is customized

Four Square Holes 360° Co-extruded
Profile: :Double Side Natural Wood Grain
Size: 138x22mm, Length is customized

M-Shape 360° Co-extruded
Profile: Natural Wood Grain/M-Shape Solid
Size: 150x23mm, Length is customized

Fully Solid 360° Co-extruded
Profile: Double Side Natural Wood Grain
Size: 140x20mm, Length is customized

No-Gap 360° Co-extruded Six-Hole
Profile: Natural Wood Grain/Brush Treatment
Size: 140x23mm, Length is customized

Narrow Grooves Solid 3D
Profile: Old Wood /M-Shape Solid
Size: 140x23mm, Length is customized

No-Gap 360° Co-extruded
Profile: Natural Wood Grain/Brush Treatment
Size: 145x23mm, Length is customized
Color Chart
Ebony
Light Grey
IPE
Walnut
Teak
Maple
Technical Test Data
- Density: 1.35g/m3 (Standard: ASTM D792-13 Method B)
- Peeling Grade: 1.24 N/mm2 (Standard: EN 319:1993)
- SVHC: Pass (Standard: EU REACH regulation No 1907/2006 Article 33(1))
- Falling mass impact: Maximum depth of residual indentation: 0.16mm (Standard: EN 15534-1:2014)
- Water absorption: 2.9 % (Standard: EN 317)
- UV aging: △E: 1.92, Grey Scale: 4-5(Standard: Cycle1 of ISO 4892-3:2016 )
- Slip resistant: R10 (Standard: DIN 51130:2014)
- Abrasion Resistance: Wear index: 37.4mg / 1000r (Standard: ASTM D4060-14)